How to to use YGDP Tool

How to use Odin Downloader
November 8, 2017
How to use Spreadtrum Upgrade Tool
November 8, 2017

YGDP Tool allows you to flash CPB format stock firmware on Any Android Device. Here, on this page we have managed to share the latest and oldest version of YGDP Tool.

YGDP Tool Start Flashing

Features of YGDP Tool

Flash Stock Firmware

It allows you to flash stock or custom firmware on your Android Device in CPB Format only. Simply Install the YGDP utility on your computer, the launch it. After launching you will be asked to enter password, enter 369 as the password.

Then after load the CPB Firmware on YGDP utility and connect your device to the computer. Once firmware is fuly loaded, click on Start to begin flashing the firmware.

Flash PreResource File

It allows you to flash the PreResource file (img) on your Android Device. To Flash the PreResource file, Open YGDP and Click on the Config thenafter under Please select PreResource file, locate the IMG file that you want to flash on your device and Click on Start to begin flashing.

Config Control

It also allows you to check the device name, check eMMC CID, check fuse info, check instruments info (but this feature is only available for Qualcomm Chipset devices).

These are the instructions on how to flash CPB firmware using YGDP Tool on any Android Device.

Requirements: Your Android device should have atleast 20-30 percent of battery to perform the Flashing Process.

How to use YGDP Tool

Step 1: Download and install the Android USB Drivers on your Computer. If Android Drivers is already installed on your computer then Skip this Step.

USB Logo

Step 2: Download and install YGDP Tool on your computer.

YGDP Tool Setup

Step 3: Now, Open YGDP Flashing Tool (C:YLXZGJYGDPYGDP_Assembly.exe).

Open YGDP Tool

Step 4: Once YGDP Flashing Tool is launched, you will be able to see the following screen:

YGDP Flashing Tool Launched

Step 5: Now, enter the Password 369 or 9527 and click on Login button.

YGDP Tool Login

Step 6: Once you are able to see the main screen of YGDP Tool, then click on the Configbutton.

YGDP Tool Launched Final

Step 7: And add the CPB firmware (locate the CPB firmware that you want to flash on your android device):

YGDP Flashing Tool Add Firmware

Step 8: Now, Click on the Apply button.

YGDP Tool Firmware Apply

Step 9: Now, connect your android device to the computer (make sure it is power off and battery installed).

Connect Android Device with Computer

Step 10: Now, click on the Start Button to begin the flashing.

YGDP Flashing Tool Start Flashing

Step 11: Once Flashing is completed you will be able to see green Upgrade Successfulmessage.

YGDP Tool Successful

Congratulations, Now your Android Device is successfully running the Stock Rom you have Downloaded.