How to use Qualcomm Flash Image Loader (QFIL)

How to use Intel Phone Flash Tool
November 8, 2017
How to use RDA IMEI Tool
November 8, 2017

These are the instructions on How to use Qualcomm Flash Image Loader (QFIL) tool to flash stock firmware on any Qualcomm Device.

Requirements: This tool only works on Qualcomm Device only. If in case you are having a device which is not powered by Qualcomm Chipset then this will not work for you.

Use Qualcomm Flash Image Loader (QFIL)

Step 1: Download and install Qualcomm USB Driver on your Computer (if you have already installed the Qualcomm USB Driver on your Computer then SKIP this step).

USB Logo

Step 2: Download and extract Qualcomm Flash Image Loader (QFIL) on your computer. After extracting, you will be able to see the following files:

qfil files

Step 3: Now, Open QFIL.exe.

qfil launch

Step 4: Once QFIL is launched, you will be able to see the following screen on your computer:

Qualcomm Flash Image Loader (QFIL)

Step 5: Now, Switch Off your Smartphone or Tablet.

power off android

Step 6: Once your Device is Switched Off, Press and Hold Volume UP Key and Connect the Device to the Computer using USB Cable.

Step 7: Now, In QFIL, Click on Browse Button and locate the Firmware (.mbn).

qfil browse

qfil locate

Step 8: Once, you have added the firmware file, QFIL will automatically load the rest of the firmware data.

Step 9: Now, Click on the Download button to begin the Flashing Process.

qfil download

Step 10: Flashing Process may take upto 10-15 minutes to complete.

Step 11: Once Flashing process is completed your device will be reboot automatically.

Thats It, We are done!. Now disconnect your device from the computer and setup everything on your device to use it.